SEPTEMBERFEST 2017 SCHEDULE

SEPTEMBER 11th-13th

9:00AM [RapidView Training Center]: NASSCO PACP Training (Laterals & Manholes)by Brandon Conley of Jack Doheny Supplies. This certification class will run from the 11th to the 13th. Contact Jack Doheny Companies to register (248) 349-0904.

SEPTEMBER 12th

7:00-10:00PM: Welcome Reception - Located at the Dam Landing on Lake Manitou in Rochester, Indiana.

 

DAY #1 - SEPTEMBER 13th

EVENTS THROUGHOUT THE DAY

9:00AM: Welcome Introduction & Year in Review

10:00AM-4:00PM: Workshops - Presentations - Demonstrations

12:00PM: Lunch

3:45PM: Prize Drawing

4:00PM: Happy Hour & Contest

5:30PM: Dinner

6:00PM-9:00PM: Casino Night & Dancing

 

PRESENTATIONS - DEMONSTRATIONS

10:00AM: "Back to the Basics" - Mainline Inspection Equipment– Whether you are inspecting 4", 10" or 110" pipelines, RapidView/IBAK has the solution for you. During this demonstration, you will see all of the various reels, tractors, cameras and accessories that will assist municipalities or contractors to tackle any type of pipeline inspection project.

11:00AM: "So Many Pipes.. So Little Time" - Tractor Configurations– Don't waste your day limping along with the wrong set up. Become more productive with the right tractor and camera configuration.

1:00PM: "Launching into the Future" - Lateral Launch System– Learn what makes the RapidView/IBAK lateral launch system the industry's best. Efficiency is much more than the number of laterals per day. Learn how a few simple adjustments may significantly impact the bottom line.

2:00PM: "Mapping the Town" - 3D GeoSense– If a picture paints a thousand words, then we don't know how many words 3DGS paints, but it's a lot! During this presentation, you will see some of the simplest, but most advanced technology in the marketplace, map the exact path of mainlines and laterals. This will take the guess work out of any horizontal directional drilling project.

3:00PM: "What's Behind These Walls?" - Cutters & Grinders– They're baack! See the new MicroGATOR (with lateral detection) in action! With longer cable lengths, powerful and quiet cutting motors, and drive units to withstand the toughest jobs, these cutters have already reset the industry's expectations. The Gator Lateral Detector is a revolutionary sensor that mounts on the front armature of the GATOR cutters, and allows the user to locate connections through the pipe liner before reinstatement.

 

MAINTENANCE WORKSHOPS

10:00AM: (20mins) Cable Protection & Care– In this workshop, learn how to get the most from your equipment by utilizing the various IBAK cable protection systems to increase the life of your cable, reduce downtime, and maximize system performance.

11:00AM: (30mins) Tractor Care & Wheel Seals– In this workshop, learn how to care for your IBAK tractors by utilizing recommeneded maintenance and care techniques for the T76 and T66 tractors, including changing wheel seals.

2:00PM: (30mins) Camera Care, Light Housings & Sand Deflectors– In this workshop, learn how to care for your IBAK cameras by utilizing recommeneded maintenance and care techniques for ORION and ORPHEUS cameras, including changing light housings and cleaning the sand deflectors.

2:45PM: (20mins) Reel Maintenance & Care– In this workshop, learn how to care for your IBAK reels by utilizing recommeneded maintenance and care techniques for the KW305 and KT180 cable reels, including changing the level wind sliding block on the KW305 drum.

3:15PM: (45mins) Open Discussion With RapidView Technicians

 

CAMERA & CONTROLLER WORKSHOPS

10:00AM: (60mins) ORION Camera Breakdown & Discussion– Have you ever wondered what goes on inside the little camera head? This is your chance to find out! In this workshop, we will breakdown the ORION camera by completely disassembling the camera and describing each components purpose and function.

11:00AM: (60mins) NANO Camera Repair & Discussion– How does IBAK fit so many features into such a tiny camera? This is your chance to find out! In this workshop, learn all the parts of the NANO camera, each components purpose and function, and the proper repair and maintenance techniques.

2:00PM: (60mins) ORPHEUS 2 Camera Breakdown & Discussion– Have you ever wondered what makes IBAK's premier mainline inspection camera work so well? This is your chance to find out! In this work shop, we will breakdown the ORPHEUS 2 camera by completely disassembling the camera and describing each components purpose and function.

3:15PM: (60mins) Open Discussion with RapidView Technicians

 

TRACTOR & LISY WORKSHOPS

10:00AM: (60mins) T66 Tractor Breakdown & Discussion– What makes the T66 tractor so sturdy? This is your chance to find out! In this workshop, we will breakdown the T66 tractor by completely disassembling the tractor and describing each components purpose and function.

11:00AM: (60mins) T76 Tractor Breakdown & Discussion– Have you ever wanted to see inside the industry "workhorse"? This is your chance! In this workshop, we will breakdown the T76 tractor by completely disassembling the tractor and describing each components purpose and function.

2:00PM: (60mins) LISY 3.2 Breakdown & Discussion– How does each part of the LISY 3.2 work together and take you into lateral launch bliss? This is your chance to find out! In this workshop, we will breakdown the LISY 3.2 tractor attachment by completely disassembling the attachment and describing each components purpose and function.

3:15PM: (60mins) Open Discussion with RapidView Technicians

 

HANDS-ON TECH LAB

10:00AM-4:00PM: Mainline Cable Retermination Lab – Here you will learn how to reterminate MAINLINE cables. This is a hands-on class available all day. Drop in anytime to learn how to repair your cable. Tools and work stations are provided.

10:00AM-4:00PM: Lateral Cable Retermination Lab – Here you will learn how to reterminate LATERAL cables. This is a hands-on class available all day. Drop in anytime to learn how to repair your cable. Tools and work stations are provided.

 

DAY #2- SEPTEMBER 14th

EVENTS THROUGHOUT THE DAY

8:00AM: Dealer Meeting

10:00AM-4:00PM: Workshops - Presentations - Demonstrations

12:00PM: Lunch & Dealer Awards

1:00PM: Comedy Performance by Greg Hahn

2:00PM: Final Thoughts

3:00PM Prize Drawing

 

PRESENTATIONS - DEMONSTRATIONS

10:00AM: "360° View of the Sewer World" - PANORMAO & PANO SI– What is the greatest invention ever created? Here's a hint... PANORAMO! Learn how PANORAMO increases productivity, provides better data to engineers, reduces operating costs, and keeps your operators out of harm's way.

11:00AM: "I Can See Clearly Now" - High Definition– Proving once again that there is more than corn in Indiana. Inspections like you have never seen them before! If you are a municipality interested in working with the best video data available, or a contractor wishing to leverage the quality of your services, then this is the presentation for you!

 

MAINTENANCE WORKSHOPS

10:00AM: (20mins) Cable Protection & Care– In this workshop, learn how to get the most from your equipment by utilizing the various IBAK cable protection systems to increase the life of your cable, reduce downtime, and maximize system performance.

11:00AM: (30mins) Tractor Care & Wheel Seals– In this workshop, learn how to care for your IBAK tractors by utilizing recommeneded maintenance and care techniques for the T76 and T66 tractors, including changing wheel seals.

2:00PM: (30mins) Camera Care, Light Housings & Sand Deflectors– In this workshop, learn how to care for your IBAK cameras by utilizing recommeneded maintenance and care techniques for ORION and ORPHEUS cameras, including changing light housings and cleaning the sand deflectors.

2:45PM: (20mins) Reel Maintenance & Care– In this workshop, learn how to care for your IBAK reels by utilizing recommeneded maintenance and care techniques for the KW305 and KT180 cable reels, including changing the level wind sliding block on the KW305 drum.

3:15PM: (45mins) Open Discussion with RapidView Technicians

 

CAMERA & CONTROLLER WORKSHOPS

10:00AM: (60mins) ORION Camera Assembly & Discussion– Have you ever wondered what goes on inside the little camera head? This is your chance to find out! In this workshop, we will completely assemble the ORION camera and describe each components purpose and function.

11:00AM: (60mins) System Operation & Troubleshooting– In this workshop, we will review the general principles of operation and troubleshooting by describing and demonstrating the techniques used by RapidView technicians to help diagnose where system problems arise.

2:00PM: (60mins) ORPHEUS 2 Camera Assembly & Discussion– Have you ever wondered what makes IBAK's premier mainline inspection camera work so well? This is your chance to find out! In this work shop, we will completely assemble the ORPHEUS 2 camera and describe each components purpose and function.

3:15PM: (60mins) Open Discussion with RapidView Technicians

 

TRACTOR & LISY WORKSHOPS

10:00AM: (60mins) T66 Tractor Assembly & Discussion– What makes the T66 tractor so sturdy? This is your chance to find out! In this workshop, we will completely assemble the T66 tractor and describe each components purpose and function.

11:00AM: (60mins) T76 Tractor Assembly & Discussion– Have you ever wanted to see inside the industry "workhorse"? This is your chance! In this workshop, we will completely assemble the T76 tractor and describe each components purpose and function.

2:00PM: (60mins) LISY 3.2 Assembly & Discussion– How does each part of the LISY 3.2 work together and take you into lateral launch bliss? This is your chance to find out! In this workshop, we will completely assemble the LISY 3.2 tractor attachment and describe each components purpose and function.

3:15PM: (60mins) PANORAMO 2 Repair & Maintenance– What makes the PANORAMO 2 able to inspect pipe so fast? This is your chance to find out! In this workshop, learn all the parts of the PANORAMO 2, each components purpose and function, and the proper repair and maintenance techniques.

 

HANDS-ON TECH LAB

10:00AM-4:00PM: Mainline Cable Retermination Lab – Here you will learn how to reterminate MAINLINE cables. This is a hands-on class available all day. Drop in anytime to learn how to repair your cable. Tools and work stations are provided.

10:00AM-4:00PM: Lateral Cable Retermination Lab – Here you will learn how to reterminate LATERAL cables. This is a hands-on class available all day. Drop in anytime to learn how to repair your cable. Tools and work stations are provided.

 

 

 

 

 




GSA

NJPA

Have a Question? Let us help!

Let RapidView help find the pipe or manhole inspection system that is best for you! Please fill out the information below and one of our friendly and knowledgeable sales representatives will call or email you in a timely manner.